Product ID:RELIACOR II ROSIN CORE SOLDER 0.032 5LB
MSDS Date:06/16/1994
FSC:3439
NIIN:00-781-2629
MSDS Number: CGMGN

ALPHA METALS,INC.

600 ROUTE 440
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-434-6778(CHEMTREC 800-424-9300)

Info Phone: 201-434-6778

Cage: EO354

FRYS METALS INC (FORMER ALPHA METALS)

JERSEY CITY, NJ 07304 US

Telephone: 201-434-6778

Cage: 96613

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9596

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.05MG/M3, A3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA 313) (CERCLA)

CAS: 7440-36-0

RTECS: CC4025000

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG (SB)/M3; 9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

ROSIN, TAKEN FROM QQ-S-571 TABLE

CAS: 8050-09-7

SILVER (SARA 313) (CERCLA)

CAS: 7440-22-4

RTECS: VW3500000

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

INDIUM

CAS: 7440-74-6

RTECS: NL1050000

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9596

LD50 LC50 Mixture:ROSIN: ORAL-RAT LD50 >5000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF ROSIN FUME MAY
CAUSE DIZZINESS OR HEADACHE, MAY ALSO CAUSE ALLERGIC REACTION.
FUMES MAY CAUSE EYE IRRITATION. SWALLOWING IS NOT EXPECTED TO BE A
HEALTH HAZARD (UNLIKELY TO OCCUR). MOLTEN SOLDER WILL CAUSE BURNS.
CHRONIC: PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN RASH.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYES: REDNESS, TEARING, BLURRED VISION,
DISCOMFORT. SKIN: BURNS (PAIN, BLISTERS, REDNESS), RASH (REDNESS,
ITCHING, DISCOMFORT). INHALED: COUGHING, DIZZINESS, HEADACHE, SORE
THROAT. INGESTED: NONE GIVE N.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALED: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE
OXYGEN AND GET MEDICAL ATTENTION. EYES: IF BURNED, COOL WITH WATER
AND GET IMMEDIATE MEDICAL ATTENTION. IF FUME IRRITATED, REMOVE FROM
EXP OSURE. SKIN: FR BURNS, COOL WITH WATER AND GET MEDICAL
ATTENTION. FOR RASH, REMOVE FROM EXPOSURE AND GET MEDICAL AID.
INGESTED: CALL DOCTOR OR POISON CONTROL CENTER IMMEDIATELY.

Flash Point:NONE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS WITH
FULL PROTECTIVE CLOTHING, IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.

Spill Release Procedures:SOLID AT ROOM TEMPERATURE. IF MOLTEN, ALLOW TO
COOL AND SOLIDIFY; THEN SCRAPE UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS OF STORAGE.
Other Precautions:FOR INDUSTRIAL USE ONLY. READ ALL CONTAINER LABELING.
FOOD AND DRINK SHOULD NOT BE CONSUMED OR TOBACCO PRODUCTS USED, NOR
COSMETICS APPLIED IN AREAS WHERE SOLDERS MAY BE USED.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR WITH
ORGANIC VAPOR CATRIDGE OR SCBA, AS REQUIRED. USE IN ACCORDANCE WITH
29 CFR 1910.134.
Ventilation:PROVIDE GENERAL OR LOCAL EXHAUST TO MAINTAIN EXPOSURES
BELOW TLV.
Protective Gloves:MFR:NONE HMIS:PROTECT FROM THERMAL BURNS
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:NONE NORMALLY NEEDED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. ALUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL WIRE,ODORLESS

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, ABIETIC ACID,
ALIPHATIC ALDEHYDES, DITERPENE ACIDS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. ALLOY PORTION IS RECLAIMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.